Recent job: fire-rated duct repair, Silverwater
Close to Parramatta in Silverwater, our crew repaired the vermiculite fire spray on a fire-rated mechanical duct running through a tight plant room and riser. We re-sprayed the duct, made good around the access panel and surrounding services, and protected the adjacent plant during the work.



Vermiculite fire spray services in Parramatta
Fire-rated ducts and plant rooms
Vermiculite spray to mechanical and kitchen exhaust ducts, plant rooms and risers, worked around existing services and access panels.
Structural steel
Fire spray to steel beams and columns to the thickness the tested system needs for the required FRL. Usually the most cost-effective option for steel hidden in ceilings and voids. More about fire spray.
Carpark soffits
Vermiculite spray to carpark slab soffits and transfer beams in residential and commercial basements.
Repairs and make-good
Electricians, plumbers and mechanical trades regularly damage existing fire spray. We patch and re-spray it so the fire rating is restored and certified before handover.
Why builders use Ary Fire
- Specialist passive fire contractor: we do the spraying, not just supply product.
- Tested and assessed systems matched to your fire engineering report.
- Thickness checked and recorded on every area treated.
- Installation certificate for your certifier and passive fire register.
Intumescent painting and steel fire rating in Parramatta
Not every steel member suits vermiculite spray. Where steel is exposed in a lobby, stair or shopfront, intumescent paint gives the same steel fire rating with a smooth painted finish. Our crew applies both, so one contractor can do the fire spray above the ceiling and the intumescent painting on the steel you can see.
As an intumescent paint contractor, we specify the intumescent coating thickness for each member from the FRL and section size, apply it on site or in the workshop, record DFT readings and certify the work. See our intumescent painting Parramatta page or intumescent coating service.
Areas we cover
Parramatta, Silverwater, Westmead, Harris Park, Granville, Rydalmere, Auburn, Lidcombe, Merrylands, Blacktown and the rest of Sydney and NSW. See our Parramatta service page for intumescent painting and fire stopping too.
Common questions
Do you do vermiculite spray in Parramatta?
Yes. Ary Fire is a vermiculite fire spray contractor working across Parramatta and Western Sydney, spraying steel beams and columns, fire-rated ducts, plant rooms and carpark soffits with our own crew.
Can you repair damaged vermiculite fire spray on a duct?
Yes. Services trades often damage existing fire spray. We cut back loose material, re-spray to the required thickness and make good around access panels, brackets and penetrations, then issue an installation certificate.
How much does vermiculite spray cost in Parramatta?
It depends on the area, thickness for the FRL, access and whether it is new work or a repair. Send drawings or a few photos and we will come back with a fixed price, usually within two business days.
Do you provide an installation certificate?
Yes. Every job is handed over with an installation certificate stating the product, tested system, FRL and areas treated, ready for your certifier and passive fire register.
Need vermiculite spray in Parramatta?
Send a few photos or your drawings. We'll come back with a fixed quote and an installation certificate at handover.
