
Passive fire protection for Parramatta builders
Parramatta and the surrounding Western Sydney growth areas have more steel-framed commercial, education, health and mixed-use projects going up than anywhere else in Sydney. Ary Fire gives builders and steel fabricators one contractor for the fire rating of that steel: we work to the fire engineering report, use tested and assessed systems, and hand over the paperwork your certifier needs.
Our services in Parramatta
Intumescent painting
Thin-film intumescent coatings to steel columns, beams, lintels and shelf angles, rated from FRL 30 to FRL 120. Applied on site or in the fabricator's workshop, with DFT readings recorded for every member. More about intumescent coatings.
Vermiculite fire spray
Cementitious and vermiculite fire spray to steel beams, columns, carpark soffits and plant rooms, including make-good and patching after services trades. More about fire spray.
Fire stopping and penetrations
Fire collars, wraps, sealants and riser sealing to tested systems, with a passive fire register for each level. More about fire stopping.
Recent project: intumescent coating at 12 Charles Street, Parramatta
Ary Fire applied intumescent coating to the structural steel at 12 Charles Street, Parramatta, including the lift shaft beams and columns. Intumescent paint is a thin-film fire protection coating that expands when exposed to heat, insulating the steel and helping it hold its load for the required fire resistance level. It suits exposed steel where a clean, painted finish matters.
On this Parramatta intumescent coating job our team prepared the steel, applied the intumescent paint in measured coats, and carried out quality testing with readings recorded at each test location so the builder has documentation for handover and certification.





Need an intumescent painter or intumescent coating contractor in Parramatta? Send us your drawings or photos for a fast quote. Looking for vermiculite instead? See our vermiculite spray Parramatta page.
How it works
- Send drawings or photos. Structural drawings, the fire engineering report or a few site photos are enough to start.
- Fixed quote. We measure the steel, confirm the FRL and tested system, and price it, usually within two business days.
- On site. Our own crew applies the system to the required thickness and records it.
- Handover. Installation certificate and register for your certifier.
Intumescent painting and steel fire rating in Parramatta
Steel-framed schools, lift shafts, commercial towers and warehouses across Parramatta and Western Sydney all need their steel fire rated. Where the steel is exposed or space is tight, intumescent paint is usually the best fit: a thin intumescent coating that looks like paint but expands in a fire to insulate the steel for the specified FRL.
Ary Fire is an intumescent paint contractor that handles the full scope: take-off from your structural drawings, coating thickness set for every section, surface preparation, intumescent painting on site or in the fabricator's shop, DFT readings on every member and an installation certificate at handover, as on our 12 Charles Street lift shaft job. More about intumescent coating.
Areas we cover around Parramatta
We work across Parramatta and nearby suburbs including Westmead, Harris Park, Granville, Rydalmere, North Parramatta, Merrylands, Auburn, Lidcombe, Blacktown and Baulkham Hills, as well as the rest of Sydney, NSW, the ACT and Victoria.
Common questions
Do you do intumescent painting in Parramatta?
Yes. We apply intumescent coatings to structural steel columns, beams and bracing on sites across Parramatta and Western Sydney, on site or in the fabricator's yard, to the dry film thickness the tested system requires for your FRL.
How much does fire spray cost in Parramatta?
It depends on the steel sizes, the FRL, access and whether it is new work or a make-good. Send us your drawings or a few photos and we will come back with a fixed price, usually within two business days.
Intumescent paint or vermiculite fire spray - which do I need?
Intumescent suits exposed steel where the finish matters. Vermiculite spray is usually cheaper per square metre and suits hidden steel such as carpark soffits, ceiling voids and plant rooms. We price both options where either will meet the FRL.
Do you provide installation certificates?
Yes. Every job is handed over with an installation certificate stating the product, tested system, FRL and areas treated, ready for your certifier and the passive fire register.
How quickly can you start in Parramatta?
For small jobs and make-goods we can often be on site within a week. For larger packages we program around your steel erection and linings.
Need fire protection in Parramatta?
Send your drawings, fire engineering report or a few photos. We'll come back with a fixed quote, the tested system we'd use, and an installation certificate at handover.
