Get a Quote
Home / Service areas / Mascot, Green Square & Coogee

Passive Fire Protection in Mascot, Green Square, Coogee & Sydney Airport

Intumescent coatings, vermiculite fire spray and fire stopping for builders, airport contractors, strata and services trades across Mascot, Green Square, Zetland, Rosebery, Botany, Maroubra, Coogee and the eastern suburbs. One crew for the fire rating, and the installation certificate to prove it.

Ary Fire contractor installing intumescent spray coating to a structural steel column at Sydney Airport
Intumescent spray coating to structural steel at Sydney Airport, applied by the Ary Fire crew.

Your passive fire contractor for Mascot and Green Square

Mascot, Green Square and Zetland are one of Sydney's busiest construction corridors: new apartment towers, commercial fit-outs, warehouses and logistics sites, and the airport precinct itself. Every one of them needs structural steel fire rated, fire-rated ducts sprayed and service penetrations sealed before the certifier will sign off.

Ary Fire works to your fire engineering report and BCA requirements, uses tested and assessed systems, records dry film thickness and spray thickness as we go, and hands over an installation certificate at the end of every job.

Recent project: intumescent painting to a steel lift frame, Mount Street, Coogee

Ary Fire applied intumescent paint to a new multi-level structural steel lift frame at a residential renovation on Mount Street, Coogee. The frame of steel columns, beams and rails runs over three levels at the front of the house, so every member had to be fire rated before the lift and cladding went in.

Working from the builder's scaffold, our intumescent paint contractors prepared the steel, built the intumescent coating up to the required dry film thickness on every face, including the welded joints and beam-to-column connections, then finished the frame in a smooth white so it is ready to be left exposed as part of the architecture. Thickness readings were recorded as the coating went on for the installation certificate.

Walk-around of the finished intumescent coating, Mount Street, Coogee

Need intumescent painting or steel fire rating on a house, apartment or commercial job in Coogee, Randwick, Clovelly, Bronte or Bondi? See our intumescent coating service or send your drawings for a fast quote.

Recent project: intumescent spray coatings at Sydney Airport

Ary Fire's crew applied intumescent spray coating to structural steel columns and column-to-beam connections at Sydney Airport in Mascot. The work was done at night around live airport operations, with the steel coated up to the underside of the roof deck and the bolted connections fully covered so the whole member reaches its required fire resistance level (FRL).

Intumescent coating is a thin-film fire protection paint. In a fire it swells into a thick insulating char that slows the steel heating up, so the structure keeps carrying load for the rated period. It suits exposed steel at airports, terminals, aerobridges, carparks and transport projects because the finish stays slim and clean, and it can be top-coated to suit the building.

Recent project: vermiculite fire spray to a fire-rated duct in Zetland

In Zetland, Ary Fire applied vermiculite fire spray to a fire-rated duct inside the building. Fire-rated ducts carry kitchen exhaust, smoke and mechanical air through fire compartments, so the duct has to hold its fire rating along its whole length or fire can travel between floors. Our crew sprayed the vermiculite to the specified thickness on every face of the duct and its supports, leaving a continuous, even coat ready for inspection.

Recent project: vermiculite fire spray to steel posts in Maroubra

At a building in Maroubra, Ary Fire applied vermiculite fire spray to the steel posts and connections supporting a roof structure over an outdoor courtyard and balcony area. Each post was sprayed from the base plate up to the roof framing, including the head connection, to give the steel its required fire rating.

See all our projects.

Intumescent painting and steel fire rating in Mascot, Green Square and Coogee

Most of the steel we fire rate around Mascot, Green Square and the eastern suburbs is exposed: columns in shopfronts and lobbies, balcony and pergola frames, mezzanines, lintels and connections. For that steel, intumescent paint is the right fire rating. It goes on like a normal paint finish, then swells into an insulating char in a fire to protect the steel for the required FRL.

As a specialist intumescent paint contractor, Ary Fire handles the whole job: confirming the FRL and section sizes from your drawings, choosing a tested intumescent coating, preparing and priming the steel, building the coating to the specified dry film thickness and finishing it ready for the topcoat. Every member is measured and recorded, and you get an installation certificate for the certifier. Whether it is a single steel post in Coogee or a warehouse in Mascot, the intumescent painting is done by our own crew.

Passive fire services in Mascot and surrounding suburbs

Intumescent coatings

Intumescent paint and spray-applied intumescent to steel columns, beams, posts, lintels and connections from FRL 30 to FRL 120, on site or in the fabricator's workshop, with DFT readings recorded for every member. More about intumescent coatings.

Vermiculite fire spray

Vermiculite and cementitious fire spray to steel beams, columns and posts, basement carpark soffits, fire-rated ducts and plant rooms, plus patching and re-spray where services have been run through existing fire spray. More about fire spray.

Fire stopping and penetration sealing

Fire collars, fire wraps, batts and fire-rated sealants to pipes, cables and ducts through fire-rated walls and slabs, plus electrical and plumbing riser sealing, with every penetration labelled and logged in a passive fire register. More about fire stopping.

Defects and annual fire safety statement repairs

We fix damaged fire spray, missing fire collars and unsealed risers in apartment blocks, warehouses and commercial buildings, then certify the rectified work for strata, building managers and annual fire safety statements.

Who we work for

  • Builders on apartment, mixed-use, commercial and industrial projects.
  • Airport, aviation and infrastructure contractors who need steel fire rated around live operations.
  • Steel fabricators who need steel coated before or after erection.
  • Mechanical, fire and services contractors who want the passive side handled.
  • Strata and building managers fixing defects found in fire safety inspections.

How it works

  1. Send drawings or photos. Structural drawings, the fire engineering report or a few site photos are enough to start.
  2. Fixed quote. We confirm the FRL and tested system and price it, usually within two business days.
  3. On site. Our own crew installs the system to the required thickness, day or night, and records it.
  4. Handover. Installation certificate and passive fire register for your certifier.

Areas we cover around Mascot, Green Square and Coogee

Mascot, Green Square, Zetland, Waterloo, Rosebery, Alexandria, Beaconsfield, Botany, Eastlakes, Kensington, Kingsford, Maroubra, Coogee, Randwick, Clovelly, Bronte, Bondi, Redfern, Erskineville, St Peters, Tempe, Wolli Creek, Arncliffe, Sydney Airport and the rest of the inner south and eastern suburbs, plus the Sutherland Shire, the rest of Sydney, NSW, the ACT and Victoria.

Common questions

Do you do intumescent coating at Sydney Airport?

Yes. Ary Fire has applied intumescent spray coatings to structural steel columns and connections at Sydney Airport, including night works around live airport operations.

Are you a passive fire contractor near Mascot and Green Square?

Yes. Our crew works across Mascot, Green Square, Zetland, Waterloo, Rosebery, Alexandria, Botany and Maroubra, about 20 minutes from our Cronulla base.

What passive fire work do you do?

Intumescent coatings to structural steel, vermiculite and cementitious fire spray to beams, columns, posts and ducts, and fire stopping to service penetrations with collars, wraps and sealants, all using tested or assessed systems matched to your fire engineering report.

Can you fire rate a mechanical duct?

Yes. We apply vermiculite fire spray to fire-rated kitchen exhaust, smoke and mechanical ducts to the FRL in your fire engineering report, and repair duct fire spray damaged by other trades.

How much does fire spray or intumescent coating cost in Mascot?

It depends on the steel sizes, duct area or number of penetrations, the FRL, access and whether it is new work or a repair. Send drawings or photos and we will come back with a fixed price, usually within two business days.

Do you provide installation certificates?

Yes. Every job is handed over with an installation certificate stating the product, tested system, FRL and areas treated, ready for your certifier and annual fire safety statement.

Need passive fire work in Mascot or Green Square?

Send your drawings, fire engineering report or a few photos. We'll come back with a fixed quote, the tested system we'd use, and an installation certificate at handover.