Get a Quote
Home / Service areas / Sutherland Shire

Passive Fire Protection in the Sutherland Shire

Intumescent painting, vermiculite fire spray and fire stopping from a local crew based in Cronulla. Builders, strata managers and services contractors across the Shire get one contractor for the fire rating, and the paperwork to prove it.

Ary Fire vermiculite fire spray applied to structural steel beams and columns
Vermiculite fire spray to structural steel beams and columns, applied by the Ary Fire crew.

Your local passive fire contractor

Ary Fire is based at 1-7 Allison Road, Cronulla. When your job is in Caringbah, Taren Point, Miranda or Sutherland, we're minutes away, not an hour across Sydney. That matters for the jobs other contractors don't want: a handful of penetrations before a final inspection, a make-good after the electrician has been through, or a site visit to measure up before you lock in a price.

We work to your fire engineering report and BCA requirements, use tested and assessed systems, record what we install, and hand over an installation certificate your certifier can sign off against.

Passive fire services across the Shire

Intumescent painting

Thin-film intumescent coatings to steel columns, beams, lintels, posts and shelf angles, from FRL 30 to FRL 120. Applied on site or in the fabricator's workshop, with dry film thickness readings recorded for every member. Ideal for exposed steel in shopfronts, mezzanines, apartment balconies and new commercial fit-outs. More about intumescent coatings.

Vermiculite fire spray

Vermiculite and cementitious fire spray to steel beams and columns, basement carpark soffits, ducts and plant rooms, plus patching and re-spray where services have been run through existing fire spray. More about fire spray.

Fire stopping and penetration sealing

Fire collars, wraps, batts and sealants to pipes, cables and ducts through fire-rated walls and slabs, plus electrical and plumbing riser sealing. Each penetration is labelled and logged in a passive fire register. More about fire stopping.

Repairs, make-goods and defect rectification

Fire ratings get broken after handover. We fix damaged fire spray, missing or non-compliant collars and unsealed risers in apartment blocks, shopping centres and commercial buildings, and certify the rectified work for strata and annual fire safety statements.

Recent project: Dicker Data warehouse, Kurnell

Ary Fire applied intumescent coating and a protective topcoat to the structural steel columns throughout the Dicker Data warehouse in Kurnell, just down the road from our Cronulla base. The columns are finished in high-visibility safety yellow, which also protects the intumescent from knocks and forklift traffic.

Our crew prepared the steel, built up the intumescent coating to the required thickness, then applied the protective coating over the top, working around the other trades and elevated work platforms on a live construction site.

Other Shire jobs on our books include vermiculite fire spray to ductwork in Engadine to a 2-hour FRL, and intumescent coating to factory structural steel in Waterfall. See all our projects.

Need an intumescent coating contractor in Cronulla, Kurnell or anywhere in the Shire? Send your drawings or a few photos for a fast quote.

Recent project: fire-rated bulkhead and service penetrations, 49 Gerrale Street, Cronulla

Ary Fire's passive fire team built a fire-rated bulkhead and sealed every service penetration running through it at 49 Gerrale Street, Cronulla, using a complete Trafalgar passive fire system, a few minutes from our base on Allison Road. The bulkhead carries sprinkler mains, PVC stormwater and drainage pipes and insulated mechanical services, so every pipe passing through the fire-rated construction had to be fire stopped to keep the compartment's fire rating intact.

Here's how our passive fire technicians did it:

  1. Fire-rated bulkhead framed and lined. The bulkhead was boxed in with Trafalgar Maxlite fire-rated board to form a continuous fire-rated enclosure around the services.
  2. Fire collars fitted to plastic pipes. Each PVC pipe penetration received a Trafalgar SuperSTOPPER intumescent fire collar. In a fire the collar expands and crushes the softening pipe closed, stopping fire and smoke travelling through the opening.
  3. Fire wrap to metal and insulated pipes. The steel sprinkler pipe and lagged services were wrapped with Trafalgar fire wrap at the penetration, secured with stainless steel banding, to stop heat conducting through the pipe and igniting materials on the other side.
  4. Gaps sealed. Remaining annular gaps around the services were sealed with Trafalgar fire-rated sealant so there are no paths left for smoke or flame.
  5. Labelled and documented. Penetrations were identified and recorded so the work can be certified and checked at the building's annual fire safety inspection.

The scaffold-access job was completed around the other trades on a live site, with a clean finish ready for painting.

Need fire collars, fire stopping or a fire-rated bulkhead in Cronulla, Caringbah, Miranda, Sutherland or anywhere in the Shire? Ary Fire installs penetration seals and fire-rated construction for builders, plumbers, electricians, mechanical contractors and strata, and can fix defects flagged on your annual fire safety statement. Send photos or drawings for a fast quote.

Recent project: vermiculite fire spray to a fire-rated duct, Menai

Ary Fire sprayed vermiculite fire protection to a fire-rated duct running floor to ceiling through an office tenancy in Menai, in the Sutherland Shire. The duct rises from the slab, offsets part way up and continues into the ceiling void, so every face, corner and the offset had to be sprayed to an even thickness.

Our crew masked and sealed off the room in plastic to protect the walls, floor and shelving, set up the vermiculite mixer and spray rig on site, sprayed the duct full height from the slab into the ceiling void, then stripped the masking and cleaned up so the tenancy was ready for the next trade.

Our vermiculite mixer and spray rig set up on site in Menai

Need fire spray to a duct, steel beam or column in Menai, Sutherland, Engadine or anywhere in the Shire? See our vermiculite fire spray service or send a few photos for a fast quote.

Intumescent painting and steel fire rating in the Sutherland Shire

Looking for an intumescent paint contractor in Cronulla, Caringbah, Miranda or Sutherland? Intumescent paint is the go-to for steel fire rating where the steel stays on show: shopfront and mezzanine columns, balcony posts, lintels over openings and warehouse frames like the Dicker Data job in Kurnell. It looks like a normal paint finish, but in a fire the intumescent coating expands into a thick insulating char that keeps the steel strong for the required FRL.

Our crew does the intumescent painting from start to finish: we check the FRL and steel sizes, specify the coating thickness for each member, prepare and prime the steel, apply the intumescent coating to the right dry film thickness, then topcoat and certify it. Being based in Cronulla, we can measure up, paint and certify Shire jobs quickly. More about intumescent coating.

Who we work for

  • Builders on new commercial, mixed-use and apartment projects.
  • Steel fabricators who need steel coated before or after erection.
  • Fire and services contractors who want the passive side handled.
  • Strata and building managers fixing defects found in fire safety inspections.

How it works

  1. Send drawings or photos. Structural drawings, the fire engineering report or a few site photos are enough to start. Local? We can come and measure up.
  2. Fixed quote. We confirm the FRL and tested system and price it, usually within two business days.
  3. On site. Our own crew installs the system to the required thickness and records it.
  4. Handover. Installation certificate and passive fire register for your certifier.

Areas we cover in the Sutherland Shire

Cronulla, Caringbah, Taren Point, Miranda, Sutherland, Kirrawee, Gymea, Sylvania, Jannali, Engadine, Menai, Kurnell, Woolooware, Kareela, Loftus and the rest of the Shire, plus St George, Mascot and Green Square, the rest of Sydney, NSW, the ACT and Victoria.

Common questions

Are you a local passive fire contractor in the Sutherland Shire?

Yes. Ary Fire is based at 1-7 Allison Road, Cronulla, so jobs anywhere in the Shire are close to home. That makes small jobs, inspections and make-goods quick to get to.

What passive fire work do you do?

Intumescent painting to structural steel, vermiculite and cementitious fire spray, and fire stopping to service penetrations with collars, wraps and sealants. Every job uses tested or assessed systems matched to your fire engineering report.

How much does passive fire protection cost in the Sutherland Shire?

It depends on the steel sizes or number of penetrations, the FRL, access and whether it is new work or a repair. Send drawings or a few photos and we will come back with a fixed price, usually within two business days.

Do you provide installation certificates?

Yes. Every job is handed over with an installation certificate stating the product, tested system, FRL and areas treated, plus a passive fire register for penetration work, ready for your certifier.

Can you fix fire spray or fire seals damaged by other trades?

Yes. We patch and re-spray damaged fire spray and re-seal penetrations disturbed by electricians, plumbers and mechanical trades, then certify the work so the fire rating is restored.

Need passive fire work in the Shire?

Send your drawings, fire engineering report or a few photos. We'll come back with a fixed quote, the tested system we'd use, and an installation certificate at handover.